Enquiry:hkmarketing@epc.com.hk 
Whatsapp Enquiry: +85261990717
Description
Seed or ground meal is gravity-fed to the press from an integral feed hopper fitted with a manually operated shut-off slide.
The thickness of the press cake may be varied. The press is driven at the discharge end through a single-reduction helical gearbox.
The power source is a 4kW, four-pole, three-phase electric motor. Typical throughput data for various seeds is shown in the table below.
Technical details
screw press ,having barrel constructed from separate cast rings spaced apart by shims. 60mm diameter bore, 155mm drainage length with single-piece wormshaft driven at the discharge end through a single- reduction helical gearbox.Complete with feed hopper, manual feed chute, oil discharge chute and suitable base plate. Includes: one 4kW, four-pole motor, 1,450rpm with starter.
FIRST PRESS
SECOND PRESS
Seed
Pre-treament
Through put Kg/hr
% Oil in cake
Through put (1st press cake) Kg/hr
% Oil in cake
Sunflower
Clean
35/40
15/28
40
12
Rape
Clean
35/40
17/20
40
13
Linseed
Clean
28
20
40
12
Copra
Clean and break to 10/12mm pieces
40
30
40
12
Palm kernels
Clean and grind to 8 mesh
35/40
20
35
12
Macadamia kernels
Clean
30 (60%
kenels/ 40%cake)
20/24
30
14/16
Overall dimensions
Length
1.20m
Width
0.99m
Height
1.09m
Packed and crated shipping specifications
Volume
1.10m3
FT28
320kg
